But WAIT! There's MORE!

This isn't a very good photo, but the darker green is actually a fairly bright, grassy green. I was pleased with the color, and I had called this print finished. Still, something was nagging at me about it.

I've long believed that you need three tones of color to show depth. Sometimes you can use shading, sometimes you need three colors.

To me, this lacked depth. The dome has three levels of color -- white and two grays, and I think it gives the dome a good feel. While the Poinsettias aren't bad, they just don't pop for me. So I went back.

So, I carved out larger areas where I had carved for the light yellow-green, and added some cross-hatching in places (notably, on the stems). I then overprinted with a fairly dark green. I definitely got the effect I wanted, but now I have a different problem: The leaves feel too 2D. That's fine, except that I have carved away all that area. With reduction printing, there's no going back.

Well, there's always a way to go back. I will carve another block and attempt to add in some darker areas and maybe do some shadowing in those hatched areas in the center. It's a lot of work, but I think this print deserves it, and you know I could use the practice. The center of the sunflower in "Sunflower Farm (2014) used the same save.

Going Green

Just one more color to go. I'm really pleased with the colors and the coverage I'm getting from my Renaissance Graphics ink.

This light green will serve as the base for a darker green. I've had few issues with this print, and I'm surprised a bit because when a large area gets cut away, I am often plagued by ink getting on the block in areas it shouldn't be. Am--am I getting better? Gasp!🤔😁

A Stab of Color

I enjoy revealing prints to you one color at a time, because that's how I see it. Even though I know what the end image will be, I'm usually working off of a pencil and marker sketch. Like watching a Polaroid develop, printing each state reveals more and more, until at last the image is whole.

Here, you see the dome of the Buffalo and Erie County Botanical Gardens is complete, bright against a bright blue sky.

Under The Dome: Pt. 2

I think you can see where I'm going with this. If you live in Western New York, you can see EXACTLY where I'm going with this. The gray days are over. Let's put some color on this baby.

Under The Dome

I'm warmed up now, and ready to be challenged. This is the first color I printed, a nice light sky blue. I shot it backlit so you can see the detail. I hadn't realized how intricate the lines were going to be until I started drawing it out. Cutting was okay, but I need a new prescription for my glasses.




I should have shot the 2nd color backlit as well! I think you can see the color difference here. There are two grays, one light and one dark. I'm not sure which this one is yet! I will have to make the call after the ink dries. That is the drawback of reduction printing -- you can't play with colors as much. You pretty much have to have your decisions made going in. Not that it couldn't be corrected (see the newt print), but what an unnecessary step. Oh well, the debacle at the beginning of the newt print has left me wary and wiser!

Back & Forth

Years ago I worked in a shop with a talented printmaker who had studied under Frasconi. He showed me a number of his large portrait woodcuts, intricate and beautiful. The backgrounds, however, were just a series of scribbles made with a Steel. He commented that after the portrait was complete, he got bored. I get that, and the struggle with background is real.

I have struggled with background since I was in grade school. How tedious to detail what's BEHIND your subject. And too much detail camouflages the subject.

Luckily, I also study cartooning, and that has helped me immensely. Take any cartoon, and you will see most are not detailed, and instead they use spare symbols to impress upon a viewer the IDEA of what the symbols represent. Three rectangles in a blank field is a wall. A squiggle represents water, a few jagged spikes may be grass.

To that sensibility, I added an old technique I learned in kindergarten, but I've found traces it's roots to the surrealists: scribble drawings. I used the same technique with the Newt print, and found that it gives much depth. I imagine you will see more of this as I go.

This print was more an exercise than a work, but I'm quite happy with it. I'm very happy with the colors. I'm obsessed with photographing flowers, but I still haven't developed that as a skill for printmaking, thus the more abstract impression seen here.

All Newt Review II

 Presently untitled, here is the final finished print, in the last two states. I always love how the black ties everything together. It's a little more primitive than I'd originally conceived, but it works for this print, particularly in the shading. If I were to do it over again -- and I am NOT!-- I might make the pink bolder, and the colors on the mushrooms darker. But I'm happy with it!

Hello There, Newtiful!

So here's our little guy, creeping across the forest floor. I'm still figuring out the background and how to finish, but I've no shortage of ideas.

Contrasting Opinion

Yesterday I fretted about the contrasting colors and whether there would be enough contrast when the ink dried. As you can see, everything worked well. Now we get back into the darker colors, and I think that orange is really going to pop. I'm trying something new with the background, and I'm going to worry all through that too!

Twofer Tuesday

Having rescued the print from the trick brown I used on the disappearing mushroom, I did a nice bright pink. The animal in the picture is a newt, very comon in the woods in Western New York. They are a striking bright orange with fluorescent pink dots. I prefer not to print with fluorescents due to fading, so I do the best I can to mimic. I love the look of the pink with the brown gray.

Last night, seeing that the print had dried well, I took a risk and printed the first orange. This will be the darker orange of the shadowed areas of the newt. I was very happy with this color. However, because the lighter orange is a tone of this orange, I neetd to be mindful of what happened with the mushroom. But on one of the earlier versions of this print, I played it too safe and there was way too much contrast. Here's hoping that I've figured it out!

Let's Have Fun, Guy!

The first print of 2017 is well underway and following close on the heels of this accomplishment is the first problem of 2017! But it was easily resolved and I'm back at it.

First, the print is a redo of a print I first began back in 2014, then tackled a couple more times. This was the last one:

It wasn't bad, but it wasn't quite what I'd wanted. It had some whimsy, and I liked the cartoony nature of it. But I felt I could have done better -- I was using lousy birch plywood, and I don't think I'd yet learned to properly sharpen my knives. Additionally, as evidenced here, I was still a long way from finding the cure for the ink problems I was having. The entire background should have been deep black, but the ink pulled back into tiny pools on the print after pulling it from the block.

All of those problems are gone now, and here is the print with two colors:

You can see the contrast really well between the light and dark colors of the mushroom. I was very, very happy with this. I hung the prints up to dry. The next morning, I went to do my next color and found this:

I photographed this so that you could still see the image, but in straight light, it looked like a brown square. The ink had dried to almost the exact color of the first color. Anyone who has painted a room or furniture knows this effect. As an ink tech for a printing company, I was extremely surprised, as I have never witnessed this with ink. I don't do a lot of tones, so it's not a huge problem, but it sure was disappointing. Luckily, I was able to print over this with a lighter version, and it looked awesome. 

In the Club

Early last year, after years of promising myself I would, I participated in the Baren Forum's print exchange. You can view the participating prints in this exchange, and other exchanges by clicking http://www.barenforum.org/exchange/exchange_64/intro.html. Mine is center, second from the bottom. There was so much great work, and I feel both thrilled and unworthy to be among this group.

Pretty As A Picture

With the addition of black, this print is complete. I would say that I have enjoyed this print more than about any since my very first prints 14 years ago.

As I mentioned in an earlier post, the intention was to set this print in New Mexico. I have been through several times, and love it. However, don't go looking for this place out west - the model I used for the gas station is actually an old service station onbBuffalo's East Side. The tree is also an invention, a small homage to Gustave Baumann, the great printmaker. The blue Chevy is a tribute to my dad. The camper color is a nod to my wife.

I have done two other little camper prints, and I plan many more.

As per usual, I can only see the things I would change, little mistakes here and there. That's how I learn. But overall, it's exactly what I had pictured, and I am thrilled with the result.

Going to take some time to plan the next print, so please stay tuned!

Tone Depth

 While it may look identical to the last color, this lighter green helps establish depth and texture on the trees and grass. One last color!

Life On Mars

Like my woodcut hero Gustave Baumann, I am drawn the beauty of New Mexico. This print is the first in what I hope will be a series of works featuring vintage campers in all 50 states.

As alluring as the weather worn buildings, craggy rocks and red soil can be, there needs to be a little life in the picture. This dark green sets the base for the brighter green to come.

The ink layers (now at ten) are finally giving me resistance, which I expected, though at this stage the rough coverage is working in favor of the image.

Rusty

Here are two of the last five colors. The colors are very important to the finished print.

 This color, a dark rust red, was designed to be the rust on the camper, car and tire wheel, as well as the roof tiles, camper tail lights and part of the tree. If you look back at past prints, you know that I dread printing bold colors in the middle of the process. But these new inks allow me to overprint with ease, even with lighter colors.

Though the soil is red, this red was a little ftoo bold. The scene, which I will get into deeper when I'm done, suggests New Mexico. The soil color there changes with the light throughout the day, so I wanted to keep the suggestion of the read, but to tone it down.

I would have preferred to go a tad lighter, but I needed good contrast with the beige in the camper, wall and fence; I also wanted something more tree-bark-like.

Now, on to some leaves and grass to pick up the color a bit, with a finish of black.

A note about the sign. As reported earlier, this was an improvised add, just a hint of an old painted sign, weathered away. With no significance, I chose the letter "k" because it was structurally interesting, and not necessarily difficult to carve. Although I'm still working on it, the letter got a little bit away from me. I realised today that it is reminiscent of the Sanskrit "om" symbol. This was unintended; yet, this print has surely been meditation for me. Maybe it's a sign!😂

The Long way 'Round

Reduction printing is so simple, yet it is one of the hardest things to explain (second to Pokémon Go!). One thing that is hard to explain to people is the "why." You roll out a full block of color only to have a small area show. What a waste, right?

I disagree. Each layer is a foundation. Each layer can move you to improvisation. See the lettering? I was inspired by seeing the flat expanse of beige I had printed. The tire in the trunk was also a last minute add.

This is color #7, with 5 to go.

Out of Control

The original design for this print called for about seven colors, and in my last attempt, I only made it to five before I had to stop due to the ink issues. This time, because the ink is laying down so well, I keep changing the plan, adding more colors. There's only supposed to be one blue green, and the blue here was actually supposed to be part of the rainbow roll; now it's the first of two blues.

The risk, of course, is going too far, either building up the ink layers to the point that the picture loses detail; worse yet is the deterioration of the plywood, which can crumble and cause pieces that need to stay to the end, start to disappear. But the failure to explore is where art stops and factories begin, and I already spend too much of my life in a factory. So, I will play!

Emerging From The Shadows

With the addition of the darker blue-green, you can now not only see the full form of the little camper, but you also start to see the entire picture start to gel This is when things get exciting for me, as I can now start to see where the picture is going to end up (I also see all of the little mistakes that may have been made along the way, and this is when I try to figure ways to change things around so that the mistakes look deliberate!). On the walls of the building, you also start to see something -- are those letters? This was an improvised decision, not part of the original cartoon, or the first attempted printing. The building had originally been just flat, and I wanted a little more life. It's a gamble, but we'll see how it pays off. At this point I estimate 6 more colors.